• Block 974,567
  • Last block 1 min ago (AntPool)
  • Hashrate 1.02 ZH/s
  • Difficulty 148.36 T
  • Next adjustment −2.56 % in 1,177 blocks
  • Fees fast 1, 30 min 1, 1 h 1 sat/vB
  • Mempool 48,011 tx (11.6 vMB)
  • BTC €71,546 / $80,247
  • 1 € = 1,398 sats
  • Halving in 75,433 blocks (about Apr 2028)
  • Mined 20,108,025 BTC (95.75 % of 21M)
Skip to content
⚡ 3D-prints, 3D-design & open-source hardware for sovereign individuals ⚡
0

NerdQaxe LAN Stand

NerdQaxe LAN Stand
NerdQaxe LAN Stand - Image 2
NerdQaxe LAN Stand - Image 3
NerdQaxe LAN Stand - Image 4
NerdQaxe LAN Stand - Image 5
NerdQaxe LAN Stand - Image 6
NerdQaxe LAN Stand - Image 7
In stock

€ 19,00 incl. VAT

The first NerdQaxe+ / NerdQaxe++ Stand with integrated enclosure for the Ethernet Module which comes with our NerdLAN Adapters. The entire back of the stand is a big Bitcoin B, for those who prefer to not directly look at their miners circuit board. Mount your NerdQaxe using regular M3 pc screws, no special hardware or tools needed! Insert the Ethernet Module at an angle so the flat side locks below the two tabs, then push on the RJ45 Port side of the PCB to make it click into place.

Printed from semi translucent, biodegradable PLA.

Want to print this at home? Buy the files with fiat or bitcoin!

Works with:NerdQaxe+NerdQaxe++

Hardwire all the things!

The first NerdQaxe+ / NerdQaxe++ Stand with integrated enclosure for the Ethernet Module which comes with our NerdLAN Adapters.

Insert the Ethernet Module at an angle so the flat side locks below the two tabs, then push on the RJ45 Port side of the PCB to make it click into place. The whole back of the stand is a big Bitcoin B, for those who prefer to not directly look at their miners circuit board.

Want to print this at home? Buy the files with fiat or bitcoin!

Weight 186 g
Dimensions 23,7 × 18,4 × 6,8 cm
Works with

NerdQaxe+, NerdQaxe++
Connectivity

Ethernet (LAN)
SKU nerdqaxe-lan-stand
Category

Related products